Connect via USB

• 1). Plug the projector in. The power cable has a plastic end with two round holes on it. This plugs into the back of the projector, on the far left side, in a vertical position.
  
  
• 2). Turn the projector on. This is done by pressing the large square power button, which is centered on the right side of the control panel when viewing it from behind.
  
  
• 3). Connect the included USB cable to the USB port on the back of the projector. Connect the other end to your PC.
  
  
• 4). Click "Agree" when a screen pops up asking you if you want to install a driver file for the projector.
  
  

Connect via VGA Computer Cable

• 1). Turn the projector and your PC on.
  
  
• 2). Plug the VGA computer cable into the component video port on the projector. This port is blue colored and on the top right of the connections area at the back of the projector.
  
  
• 3). Plug the other end of the VGA cable into your computer's video-out or monitor port. This port is wider than many of the other ones on your computer and may have a symbol near it featuring two vertical lines surrounding an oval.
  
  
• 4). Switch the video monitor on your computer to "external display". This is usually done through the Video or Display options.