How to Get Grease Out of Carpeting
You may have decided to tackle that small appliance maintenance project in your living room, or sat down on the carpet after working out in your shop in the garage, but no matter how it happened you got mechanical grease and oil all over your carpet.
When that happens to you here are the steps for how to get grease out of carpeting.
Act as quickly as possible to remove the grease from the carpet.
The most important thing you can do is act as quickly as possible once you realize grease has gotten on your carpet.
The sooner you act the more likely you are to remove the grease quickly and easily, before it has a chance to set or get spread around, accidentally.
Soak up as much grease as possible with baking soda or cornstarch.
Grease can easily spread around, and you want to avoid that if at all possible.
The best way to do this is to soak up as much of it as possible with a product like baking soda or cornstarch, both of which act like a sponge to suck up the grease.
All you need to do is sprinkle some of the powder on the grease spot, and let it soak in for about 15 minutes.
Then, you can easily scrape or vacuum up the powder, along with a lot of the grease.
(You may need to do this a couple of times if there was a lot of grease, until no more seems to be soaked up by the powder.
) Remove the grease remaining on the carpet with dry cleaning solvent.
As we all know oil and water don't mix, and therefore you must use a solvent, such as dry cleaning fluid, to remove the rest of the grease from the carpet.
To do this apply a small amount of dry cleaning solvent to a white cloth and gently blot at the grease spot, allowing the grease to transfer from the carpet onto the cloth.
Continue blotting until the spot is removed.
You may need to periodically blot with a new area of the white cloth to keep grease from re-transferring from the cloth back onto the carpet during this blotting process.
Remove the solvent from the carpet, and then let it dry thoroughly.
After removing the grease spot you will need to blot at the carpet with water, to remove as much of the dry cleaning solvent as possible.
Then, let the carpet dry thoroughly for 24-48 hours.
To aid in this process you may want to have fans blowing on the carpet, or lay a heavy object onto a cloth over the damp carpet, to help wick up moisture from the carpet into the cloth.
When that happens to you here are the steps for how to get grease out of carpeting.
Act as quickly as possible to remove the grease from the carpet.
The most important thing you can do is act as quickly as possible once you realize grease has gotten on your carpet.
The sooner you act the more likely you are to remove the grease quickly and easily, before it has a chance to set or get spread around, accidentally.
Soak up as much grease as possible with baking soda or cornstarch.
Grease can easily spread around, and you want to avoid that if at all possible.
The best way to do this is to soak up as much of it as possible with a product like baking soda or cornstarch, both of which act like a sponge to suck up the grease.
All you need to do is sprinkle some of the powder on the grease spot, and let it soak in for about 15 minutes.
Then, you can easily scrape or vacuum up the powder, along with a lot of the grease.
(You may need to do this a couple of times if there was a lot of grease, until no more seems to be soaked up by the powder.
) Remove the grease remaining on the carpet with dry cleaning solvent.
As we all know oil and water don't mix, and therefore you must use a solvent, such as dry cleaning fluid, to remove the rest of the grease from the carpet.
To do this apply a small amount of dry cleaning solvent to a white cloth and gently blot at the grease spot, allowing the grease to transfer from the carpet onto the cloth.
Continue blotting until the spot is removed.
You may need to periodically blot with a new area of the white cloth to keep grease from re-transferring from the cloth back onto the carpet during this blotting process.
Remove the solvent from the carpet, and then let it dry thoroughly.
After removing the grease spot you will need to blot at the carpet with water, to remove as much of the dry cleaning solvent as possible.
Then, let the carpet dry thoroughly for 24-48 hours.
To aid in this process you may want to have fans blowing on the carpet, or lay a heavy object onto a cloth over the damp carpet, to help wick up moisture from the carpet into the cloth.
Source...