How to Make a Simple Hanging Jewelry Organizer
Having a hanging jewelry organizer is one of the best things that you can do to diminish clutter from your jewelry collection.
Not only are they easy to make they are inexpensive to make as well.
Today we will be learning to make one of these great space saving devices.
There is couple of materials that we need to gather up before we can begin on the construction of our hanging jewelry organizers.
There are a few things that we need to collect before we can start to make the hanging jewelry organizer.
The materials that we need are a piece of plastic or cloth sheet such as a tarp or bed sheet.
A sharp pair of scissors, measuring tape, stick of super glue, sewing machine or needle and thread and or a hot glue gun, a coat hanger, and a pencil marker or piece of chalk.
After we have compiled all of our items together it is time to embark on the first step of making our hanging jewelry organizers.
To do this we will need to cut the strips out for our pockets.
Cut about ten of the strips the length of the main piece of material and the width of about four or five inches.
After cutting the strips, it is now time to attach them to the main piece of material.
The best way that I have found to do is to either take the super glue or hot glue gun and tack the four corners of the strip onto the main piece.
I line up the bottom of the strip with the bottom of the main piece to get a good level line.
Once this is done I begin sewing the bottom and the sides of the strap onto the large piece.
Once you have sewn the bottom and side portions of the strip it is now time to sew the center portions that will make up the dividers for the pockets.
This portion of the project is all going to be based on personal preference and individual needs.
I usually try to fit many different size pockets into the hanging jewelry organizer.
The final step is where we add the hanging part to hanging jewelry organizer.
This is where we add the coat hanger to the main piece of material.
At this point every one of the strips should be sewn into the large material and made into pockets.
Once this is done cut a small piece of material and cut a hole just large enough for the hook part of the coat hanger to fit through.
Once this is done hem the material around the hole as to provide tear support for the hanger when it holds the organizer.
Not only are they easy to make they are inexpensive to make as well.
Today we will be learning to make one of these great space saving devices.
There is couple of materials that we need to gather up before we can begin on the construction of our hanging jewelry organizers.
There are a few things that we need to collect before we can start to make the hanging jewelry organizer.
The materials that we need are a piece of plastic or cloth sheet such as a tarp or bed sheet.
A sharp pair of scissors, measuring tape, stick of super glue, sewing machine or needle and thread and or a hot glue gun, a coat hanger, and a pencil marker or piece of chalk.
After we have compiled all of our items together it is time to embark on the first step of making our hanging jewelry organizers.
To do this we will need to cut the strips out for our pockets.
Cut about ten of the strips the length of the main piece of material and the width of about four or five inches.
After cutting the strips, it is now time to attach them to the main piece of material.
The best way that I have found to do is to either take the super glue or hot glue gun and tack the four corners of the strip onto the main piece.
I line up the bottom of the strip with the bottom of the main piece to get a good level line.
Once this is done I begin sewing the bottom and the sides of the strap onto the large piece.
Once you have sewn the bottom and side portions of the strip it is now time to sew the center portions that will make up the dividers for the pockets.
This portion of the project is all going to be based on personal preference and individual needs.
I usually try to fit many different size pockets into the hanging jewelry organizer.
The final step is where we add the hanging part to hanging jewelry organizer.
This is where we add the coat hanger to the main piece of material.
At this point every one of the strips should be sewn into the large material and made into pockets.
Once this is done cut a small piece of material and cut a hole just large enough for the hook part of the coat hanger to fit through.
Once this is done hem the material around the hole as to provide tear support for the hanger when it holds the organizer.
Source...