Gabion Baskets Installation
- 1
Clear and level the ground.Jupiterimages/Creatas/Getty Images
Clear and level the area where the gabion cages are to be installed. Ensure the ground is compacted, with no loose areas of soil. - 2
Use pliers to secure wire.Thomas Northcut/Photodisc/Getty Images
Place the gabions in position for the length of the first row and wire them together with steel wire, using pliers to secure the wire. Continue wiring all gabions together at their vertical edges in the same manner. - 3
Fill the gabions with material.Jupiterimages/Photos.com/Getty Images
Half fill the gabions with your choice of material, being careful that no sharp edges protrude through the mesh. Ensure that the material is well compacted. - 4). Secure a piece of wire from the front face of the gabion to the rear just above the compacted material. Pull the wire tight; this prevents the boxes bulging.
- 5
Wire the mesh top closed upon completion.Hemera Technologies/AbleStock.com/Getty Images
Fill the remainder of the gabion with material and wire the top closed. Again ensure that the materials lie flat and no sharp edges protrude. - 6
Backfill behind gabions.Jupiterimages/Photos.com/Getty Images
Repeat steps 1 through 5 as necessary to complete project. If the gabions form a retaining wall, back fill behind them with loose dirt. - 7). Offset the second row of gabions slightly, if more than one row is required for the project, so that a whole gabion sits across an existing joint, as in construction of a brick wall. When using multiple stacked rows as a retaining structure, the gabions should step backwards slightly against the bank for stability.
Source...