How do I Make a Mini Maglight Pipe?
- 1). Unscrew the tail cap of the flashlight and remove the batteries.
- 2). Unscrew the head of the flashlight and remove the o-ring from the barrel, the switch assay, and the lamp (see Resources for a diagram of parts).
- 3). Unscrew the face cap from the head of the flashlight then remove the o-rings, the reflector and the lens. This end of the flashlight can be used as the carb for the pipe. Keep the reflector as it will be used for creating the bowl of the pipe.
- 4). With your power drill, drill a small hole into the barrel about 3/4 of the way up from the bottom of the barrel. Drill through one wall of the barrel only--do not drill through the entire barrel.
- 5). Apply glue to the bottom of the reflector and fit the reflector onto the drilled hole. Try to glue it on so that the hole is in the center of the reflector. Let the glue dry and the pipe will be complete.
Source...