How to Change Oil on a V-Twin
- 1). Warm up the engine for 2 or 3 minutes.
- 2). Place the oil drain pan beneath the engine.
- 3). Remove the engine oil filler cap.
- 4). Remove the oil drain plug from the underside of the engine casing.
- 5). Remove the oil filter.
- 6). Coat the new engine oil filter o-ring with a small amount of the used oil.
- 7). Install the new oil filter and hand tighten.
- 8). Install the oil drain plug and tighten to the manufacturer's recommended torque setting.
- 9). Add the new engine oil.
- 10
Replace the oil filler cap. - 11
Run the engine for 2 to 3 minutes, check the level and add oil if necessary.
Source...